DHCP server not binding any network cards Event ID 1041

[Reemes]

When the server boots up I get the following error in Event Viewer "The DHCP service is not servicing any clients because none of the active network interfaces have statically configured IP addresses, or there are no active interfaces". This is Event ID 1041 and DHCP is not working and my network cards both have static IP.

The problem seems to be that when I go into the Advanced section of DHCP and go to Bindings the tick I put into my network card is not retained after I click on ok. The wierd thing is that initially DHCP was working. Help!!

 

[ChicagoTechNet]

this may help. quoted from

http://www.chicagotech.net

Event ID 1041 - The DHCP service is not servicing any clients because none of the active network interfaces have statically configured IP adresses or there are no active interfaces.

Causes: 1. Bad NIC.
2. Incorrect NIC hardware settings.
3. Incorrect TCP/IP settings.


Robert Lin, MS-MVP, MCSE & CNE
Windows, Network, Internet, VPN, Routing and How to at

http://www.ms-mvps.com

 

[Wishdiak]

Reemes,

2984590 - DHCP Service Errors 1002 and 1041 May Be Logged in the System Event Log

http://support.microsoft.com/default.aspx?scid=kb;en-us;298490

Wishdiak

http://www.wishdiak.com