Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DHCP Server Config

Status
Not open for further replies.

artfulbodger

Technical User
Jan 3, 2005
109
US
I have a DHCP server config that is driving me nuts. In short, I have DHCP working and it is handing out IP addresses, except it doesn't pass the DNS ip address so hosts cannot be found.

My network is setup thusly:

[tt]Internet <-----> Netgear <-----> Home LAN
|
|
V
Solaris 10 <---> Test LAN
|
|
V
Test Client


[/tt]
Basically I am using my Solaris 10 box as a router, dhcp server, etc. DNS is currently set to the netgear router. I have tested this configuration by manually entering the DNS IP on the client and everything works. I just can't get DHCP to do it.

I don't know what else to post to assist but here is my dhtadm -P output:

Code:
# dhtadm -P
Name                    Type            Value
==================================================
10.1.1.0                Macro           :Subnet=255.255.255.0:Router=10.1.1.1:Broadcst=10.1.1.255:DNSserv=192.168.1.1:
fred                    Macro           :Include=Locale:Timeserv=192.168.1.31:LeaseTim=86400:LeaseNeg:DNSdmain="home.net":DNSserv=192.168.1.1:
Locale                  Macro           :UTCoffst=-18000:

Thanks for any help you can provide!



-----

Allan D. Reed
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top