DHCP over frame-relay

[omalpas]

Our current setup is we have two separate subnets as shown

subnet A ---->2600----frame-relay---->1600----subnet B
Both subnet A & B have dhcp servers.
We want to remove subnets B DHCP and have it on the same subnet with clients getting thier ip address from subnets A DHCP.

I have tried the ip helper-address command but this doesn't work.

Can someone please help me
Thanks
Owen

 

[BuckWeet]

You need to do the IP helper command on the ethernet interface at side B point to the DHCP server. Make sure its forwarding the BOOTPC and BOOTPS ports. then also define the scope on DHCP to provide addresses to taht site..


BuckWeet