Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Device Pack Install - Cluster Wide Reboot?

Status
Not open for further replies.

msteeler

Technical User
Jan 29, 2003
324
US
good morning - Looking at installing a device pack so we can add a phone that is not currently available to us. Sounds like this has to be added (TFTP) to each of the servers in the cluster (total of 8) and requires a cluster wide reboot. With the new device pack I assume there will be new firmware for all of the phones. My questions is when we reboot the cluster is this going to create a mass firmware download to all of the phones on the cluster.. 10K plus? Is there a way to avoid this? Thanks
 
There is. Go to device default and change the default from the newly added firmware back to the older version and save. That way after the reboot no phones will upgrade.
 
Thanks, so I would do this after the device pack is added and before the reboot?
 
Yes, just document what loads where default before, it'll make it easier to put back afterwards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top