Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
device files
- Thread starter nozz
- Start date
I've never found a way to do that either. If you are dealing with USB, the you would try any of the /dev/usb/ttyUSBxx i.e. /dev/usb/ttyUSB01, /dev/usb/ttyUSB12 etc. For me, if I have 3 usb devices, then my options will usually be only between ttyUSB01 to ttyUSB03.
- Thread starter
- #3
type dmesg and look at the output. When the driver loads/ or a device is added you should see something there.
Also, you may have a proc entry.
/proc/bus/usb there should be a devices file in that dir.
>---------------------------------------Lawrence Feldman
SR. QA. Engineer SNAP Appliance
lfeldman@snapappliance.com
Also, you may have a proc entry.
/proc/bus/usb there should be a devices file in that dir.
>---------------------------------------Lawrence Feldman
SR. QA. Engineer SNAP Appliance
lfeldman@snapappliance.com
- Status
