TWISTEDAPP
Technical User
I seem to remember that if you don't know the IP address of the unit you can either reboot with a serial cable and settings at 9600 or can you can also get it through feature 983?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Determining IP Address Settings on CP100./150
- Thread starter TWISTEDAPP
- Start date
- Status
Deweyhumbolt
Technical User
No help with Ftr 983. You need reboot w serial cable, 9600 8-n-1.
RPMcMurphy
Vendor
Connect your serial cable, reboot the callpilot and open a capture file on your communication program, I use ProComm+, so that you can scroll back to get the IP address. I had to do this a few times and it works great. Good Luck.
- Status
Similar threads
- Locked
- Question
- Locked
- Question