Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DES CHANGE
- Thread starter ERR5020
- Start date
Nortellian
Technical User
ld 85 for digital
ld 84 for analog
I suggest getting the manuals on the computer that way you can do a search and find this information easily.
ld 84 for analog
I suggest getting the manuals on the computer that way you can do a search and find this information easily.
- Thread starter
- #3
McGruff753
MIS
Yes, you can use ECHG to change the DES field. I do this in LD 20 every day.
REQ: CHG
TYPE: 2008
MARP NOT ACTIVATED
TN 13 12
ECHG YES
ITEM DES <--when you hit the space bar, the current DES will display. Just put your new entry in and hit return.
REQ: CHG
TYPE: 2008
MARP NOT ACTIVATED
TN 13 12
ECHG YES
ITEM DES <--when you hit the space bar, the current DES will display. Just put your new entry in and hit return.
- Status
Similar threads