Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Denial event 2334-no channel resources

Status
Not open for further replies.

murph51

Technical User
Nov 30, 2005
32
US
S8300/G700 live on 10.7.0.1 network.
IP phones work OK at this site.
G350 and other IP phones live on 10.107.1.1 network.
G350 link up and running, IP phones load fine, but I get the denial event (via "list trace station")when trying to call from G350 location to G700 location. Calls within the 10.107 network are fine calls within the 10.7 network are fine, but no calls go between.
 
I can ping everything anywhere between networks.
 
Make sure the network region the G700 and G350 can talk to each other in the ip-network-region page 2 are filled out properly.
 
I have

Network region 1 10.7.0.2 10.7.0.254
Network region 2 10.107.1.2 10.107.1.254


Anything else needed?
 
On the ip-network-region screen, there shouldn't be any ip addresses, at the sat terminal, type "change ip-network-region
1" go to page two, you should see someting like this depending on the release of software you have:
change ip-network-region 1

Inter Network Region Connection Management

Region (Group Of 32)
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
001-032 1 2 3 4 5 6
033-064
065-080

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top