Deltaserver

[big70]

Im having a problem with connecting Deltaserver in monitor it say,s

174626mS PRN: TFTPServer::RRQ(from 10.65.3.251) nasystem/licence_list
175126mS PRN: TFTPServer::RRQ(from 10.65.3.251) config/~!'wtxr!>
175128mS PRN: Config Write Wake Up

176528mS ERR: TFTPReceiver Unreachable net=0a4103fb port=0xc4f
176531mS PRN: Sending Config out to ffd9f5c8 finished
176531mS PRN: Config Write Completed


It,s running on 2.1(31) think im going to upgrade to the latest version of 2.1 and see what happens.

Also tried a other PC with Deltaserver same problem.

In Delta server it says.

USER Decode LIST Failed EConvertError '$1,' is not a valid integer value

Maby somebody seen this before.

Greets Peter

 

[nx9005]

try a later version of delta server
4.0 (29) and above i think theres a higer one 4.0 (38)

 

[intrigrant]

http://support.avaya.com/japple/css...eID=276876&temp.bucketID=264968&PAGE=Document

 

[big70]

But im using Deltaserver 5.0(21)also get in Monitor

12756mS PRN: TFTPServer::RRQ(from 10.65.3.77) nasystem/call_info/0.1915.0
12756mS PRN: TFTP:: Too Many Clients (RRQ) 32
13751mS PRN: TFTPServer::RRQ(from 10.65.3.77) nasystem/call_info/0.1915.0
13751mS PRN: TFTP:: Too Many Clients (RRQ) 32
14747mS PRN: TFTPServer::RRQ(from 10.65.3.77) nasystem/call_info/0.1915.0
14747mS PRN: TFTP:: Too Many Clients (RRQ) 32
15751mS PRN: TFTPServer::RRQ(from 10.65.3.77) nasystem/call_info/0.1915.0
15751mS PRN: TFTP:: Too Many Clients (RRQ) 32
16755mS PRN: TFTPServer::RRQ(from 10.65.3.77) nasystem/call_info/0.1915.0
16755mS PRN: TFTP:: Too Many Clients (RRQ) 32

I think maby its the 2.1 (31) because i get flasbacks of 2.1(24). I go to 3.1 (29) tommorow maby it gets better.

Greets Peter

 

[big70]

Did the upgrade to 3.1(48) and also started with a clean config everything works great now.

Greets Peter