Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Delta Server as Windows Service
- Thread starter pieta
- Start date
Delta Server as a service is part of the CCC version 5 bundle.
It was pulled from IP Office 2.1 and is now part of the IP Office 3.0 bundle due March next year.
I've installed and run it - it seem fine but I was only using it for SMDR on a lightly loaded system.
It was pulled from IP Office 2.1 and is now part of the IP Office 3.0 bundle due March next year.
I've installed and run it - it seem fine but I was only using it for SMDR on a lightly loaded system.
The stand-alone SMDR can be run as a service with the use of FireDaemon.
I would suggest you first load Delta Server, configure to your liking, then configure for automatic service load via the above mentioned utility.
Erik
I would suggest you first load Delta Server, configure to your liking, then configure for automatic service load via the above mentioned utility.
Erik
Whilst we are on the subject of DeltaServer and SMDR, does anyone have any documentation on the new(ish) options on DeltaServer 4.0.35?
SMDR Com port enabled, etc....
My call logger, can only accept data via Com port, or by manually importing the file; if this would redirect to a 'virtual' com port, then this would be ideal!
SMDR Com port enabled, etc....
My call logger, can only accept data via Com port, or by manually importing the file; if this would redirect to a 'virtual' com port, then this would be ideal!
- Status
