Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dell PE2950 DRAC broke after firmware upgrade

Status
Not open for further replies.
mwingeier

mwingeier

MIS
Jul 19, 2002
41
0
0
US
I recently installed OpenManage on my Dell PE2950 and found that the storage controller wasn't recognized. Since this is the main reason for me installing OM, I upgraded my PERC 5/i firmware so that OM could see it, and found out that my DRAC 5 is now inaccessible. The system sees it, and I can configure it via the BIOS or OM, but the web page is not reachable. I have tried the hard reset as recommended by Dell, and even upgraded the DRAC firmware and the BMC firmware for good measure, with no success.
Has anyone seen this happen, or know how to get the DRAC functional again?

Thanks for your time.
 
Status
Not open for further replies.

Similar threads

PaulMThomas
  • Locked
  • Question
Drive speeds in RAID with Dell external MD1200
Replies
0
Views
48
PaulMThomas
PaulMThomas
Kurt Hamm
  • Locked
  • Question
Recovered Dell Poweredge Server
Replies
0
Views
54
Kurt Hamm
Kurt Hamm
microsvc
  • Locked
  • Question
Server x3550 7978 ServeRAID 8K-L Firmware Corrupted
Replies
4
Views
53
goombawaho
goombawaho
DaveB4fun
  • Locked
  • Question
Sun T5220 need firmware upgrade on the Power Distribution Board for DVD issue
Replies
0
Views
40
DaveB4fun
DaveB4fun
demas97
  • Locked
  • Question
Dell R715 RAID Controller / HBA
Replies
0
Views
32
demas97
demas97

Part and Inventory Search

Sponsor

Back
Top