Delivering CLID on 0x8 ASM 3

[allaboutphones]

We have a MICS 6.0 and 7.1 with PRI T1 and 0x8 Analog Station Modules. WE are trying to get the MICS to deliver the Caller ID information through the 0x8 modules to the CLID enabled analog telephones and are not having any luck. The CLID on all of the Digital Phones work just fine. CLID has been turned on on the Target Line under Telco Features and it has been set to NUMBER - is there something that we are missing? Does the MICS send the CLID out through the 0x8 Analog Station Module?

Any help would be appreciated.

 

[curlycord]

Clid not supported on ASM

=--(((((((((()--=
curlycord

http://www.curlycord.com

 

[RikRodgers]

So many other manufacturers do support it, hopefully Nortel will play catchup soon, and make that change. We've got a lot of customers that would love that.

 

[cook1082]

The BCM ASM has it.

 

[Phonehed]

PRI requires 6.1 or higher and a rls 2 NVRAM pack!

Phonehed in Dallas