Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Delete PDISK
- Thread starter june54
- Start date
Unless you physically remove the disk from the SSA array it will keep coming back when you run cfgmgr.
Jim Hirschauer
Jim Hirschauer
Find the PVID of the disk
then
odmdelete -q value=0073659c2c6d26f10000000000000000 -o CuAt
Mike
"A foolproof method for sculpting an elephant: first, get a huge block of marble, then you chip away everything that doesn't look like an elephant."
then
odmdelete -q value=0073659c2c6d26f10000000000000000 -o CuAt
Mike
"A foolproof method for sculpting an elephant: first, get a huge block of marble, then you chip away everything that doesn't look like an elephant."
Hi,
well... in the past I had also to support those H-machines with SSA disks.
As far as I remember you have to check the hdisk-pdisk relationship. cmd=ssaxlate -l xdisk (or diag).
With rmdev: 1st remove the hdisk, 2nd remove the pdisk. If you want to identify (let blink) the disk in the drawer, first do this (ssaidentify), remove the disk-HW, then afterwards remove the pdisk entry from AIX (ODM).
hth
well... in the past I had also to support those H-machines with SSA disks.
As far as I remember you have to check the hdisk-pdisk relationship. cmd=ssaxlate -l xdisk (or diag).
With rmdev: 1st remove the hdisk, 2nd remove the pdisk. If you want to identify (let blink) the disk in the drawer, first do this (ssaidentify), remove the disk-HW, then afterwards remove the pdisk entry from AIX (ODM).
hth
- Status
Similar threads
