Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

delete dect dt690

Status
Not open for further replies.

tomd110

Technical User
Sep 18, 2003
49
AT
hi Folks!

Exchange mxone

can't delete just this spezific dect

MDSH> cxake:dir=73908;
Are you sure? (Y/N): y
NOT ACCEPTED
TEMPORARY CONGESTION


MDSH> gedie:dir=73908;
Are you sure? (Y/N): y
NOT ACCEPTED
DIR=73908
TERMINAL ASSIGNED

do you have any idea?

thanks
 
restart unit CTLP (warning, this will affect DECT traffic for about 5 minutes):

RFPUI:UNIT=CTLP,LIM=ALL;


/Daddy

-----------------------------------------------------
Helping people is my job...
 
thanks for the reply

we'll try during our next Maintenance window for we are a Hospital and all our Emergency alarms are sent via dect
 
Daddy,
Maybe it's better to try with CXHH first? This doesn't kill any functions. I am not sure, but otherwise a trace from CXHH would help a bit....

fcpli
 
Hi fcpli!

we did try to restart CXHH in LIM4 (where dir 73908 is located) and next did restart CXHH in LIM1
didn't help us

MDSH> status -unit CXHH;


Unit Status
===========

2015-11-12 07:35:59

Unit : CXHH


Lim Unit Identity Status Start/Restart Phase Reload Common Function
1.0 1.3 1.5 2.0 data status act/pas
--------------------------------------------------------------------------------------------------------
1 CXHH 0x05d Started Ok Ok Ok Ok Ok Ok Active

END

MDSH> gedip:dir=73908;
DIRECTORY NUMBER PROFILE
DIR LIM CSP CUST LANG MCOST BSEC SPOPT MAXTER NDNUM
73908 4 5 0 2 - 0 - 1 -

END


MDSH> restart -unit CXHH -lim 4;
CXHH not loaded in LIM 4
MDSH> restart -unit CXHH -lim 1;
Are you sure? (Y/N): y
Restart of program unit

Restart of program unit successful

MDSH> status -unit CXHH;


Unit Status
===========

2015-11-12 07:36:56

Unit : CXHH


Lim Unit Identity Status Start/Restart Phase Reload Common Function
1.0 1.3 1.5 2.0 data status act/pas
--------------------------------------------------------------------------------------------------------
1 CXHH 0x05d Started Ok Ok Ok Ok Ok Ok Active

END

MDSH> cxake:dir=73908;
Are you sure? (Y/N): y
NOT ACCEPTED
TEMPORARY CONGESTION

NOT ACCEPTED
TEMPORARY CONGESTION

 
no only CTLP restart will resolve this...

/Daddy

-----------------------------------------------------
Helping people is my job...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top