Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Delete-bcsu help

Status
Not open for further replies.
Oct 4, 2014
57
BR
good night, I'm having difficulty to flag it, I've used it on another card and it worked normally, except that on this card I'm not successful. I noticed that this board has this line. I am using the command to delete DELETE-BCSU: PER, 1,1,11, "Q2246-X", 0,0 ,,,,,, A, 0;
I get the message
F10: MODULE LINE CIRCUITS NOT DELETED

DIS-SDSU: ALL, AND, PEN, PER2,1,1,11;
DIS-SDSU: ALL, AND, PEN, PER2,1,1,11;
H500: I LOVE SDSU STARTED

LTG1 (PERIPHERY)
------
MOUNTING LOCATION MODULE NAME BDL BD (# = ACT) STATUS
------------------- LTG 1 --------------------- READY
-AP370013 ----- SG 1 LTU 1 --------------------- READY
** .LTG 1.LTU 1.011 SLMA24 A Q2246-X READY
CCT LINE STNO SI BUS TYPE
000 1608 NOGEN
001 1609 NOGEN
002 1610 NOGEN
003 1611 NOGEN
004 1612 NOGEN
005 1613 NOGEN
006 1614 NOGEN
007 1615 NOGEN
008 1616 NOGEN
009 1617 NOGEN
010 1618 NOGEN
011 1619 NOGEN
012 1620 NOGEN
013 1621 NOGEN
014 1622 NOGEN
015 1623 NOGEN
016 1624 NOGEN
017 1625 NOGEN
018 1626 NOGEN
019 1627 NOGEN
020 1628 LOCK / AMO
021 1629 NOGEN
022 1630 NOGEN
023 1631 NOGEN
 
BCSU is to delete the whole BOARD, which it won't let you do because there are devices set up on it!!

If you just want to delete a line, and this is an Analog card, you would use DELETE-SCSU

First character
B means board
S means subscriber
D usually means device (for activate or deactivate)
U usually means "unit" - as in a whole shelf...

Now if you are trying to delete an Analog device it is SCSU
and if you are typing to delete a "binary" device (IP phone, TDM phone, Optiset, etc) you use SBCSU.

This can go on forever, but this can get you started. If you look in the FAQ section up at top you will see a reference to the Tonido site that we use to provide a considerable library of documentation and files that might help you, or check out the Unify Academy - they have an excellet roster of classes that can help get you on your way!


Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA
 
I think he does want to delete the board. But can't.

What's on circuit 20? You need to delete it.

DIS-SDSU:ALL,,PEN,PER3,1,1,11,20;

Might be a phone (delete with SCSU) or possibly special equipment (SSC).

Make a reg-ssc:all; to confirm it's not MOH device, or night bells.



Also

>>DIS-SDSU: ALL, AND, PEN, PER2,1,1,11;
>>H500: I LOVE SDSU STARTED

Where did you get that AMO ?


 
Try
CHANGE-BCSU:TYPE=RELEASE,LTG=1,LTU=1,SLOT=11,CCT=20;
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top