delete all system speed call

[danramirez]

Hi, do you know of a way to delete all system speed calls?

MiVB 8

I have tried to telnet onto the system but that is not possible anymore, I thought to do a range programming as in the old days with the SX2K but only read is allowed.

cheers,

daniel

http://www.hatkana.com

http://www.wtelecom.com

 

[wireman50]

Recently discussed here or another place; IIRC the answer was one at once.

http://www.tek-tips.com/viewthread.cfm?qid=1766015

 

[kwbMitel]

One at a time as far as I know.

There are mouse control scripts that you can use but by the time you set something like that up you could delete hundreds of speedcalls.



**********************************************
What's most important is that you realise ... There is no spoon.

 

[danramirez]

thank you guys, I will start to delete them manually, one by one...

http://www.hatkana.com

http://www.wtelecom.com

 

[Lundah]

Mitel makes it hard to delete large numbers of entries en masse on purpose. If you feel like getting ugly, you might be able to poke around in /db on the drive and delete the data table file, but that's something I'd try out on a lab system you don't mind blowing up first.

 

[kwbMitel]

@Lundah, I considered mentioning that method but I know I wouldn't do it myself.

Seemed to mean to use someone else as a guinea pig

**********************************************
What's most important is that you realise ... There is no spoon.

 

[sarond]

I would be concerned if the Speed Calls were referenced anywhere else in the system. Call Routing forms etc..
I think this would be cause for corruption.