Delayed Ringing on Trunk through CS1000E 1

[fallenangel1]

I have 3 Trunk lines. 2 in one Route and 1 in other. Problem is that I am getting delayed ring on all the three trunks, specifically on route with 2 trunks. I get the bell on first ring on Analog set connected parallel to trunk before CS1000. This means my system is delaying the ring.

Can somebody guide me about it?

Go For It Even If It's Impossible !

 

[NoypiToits]

Check the trunk Route Data Block timer.
CNTL yes
RGV 256

And then disable/enable the TN of the trunk member..

You can play around for the adjustment in this parameter.

 

[fallenangel1]

Alright. Let me check it right now.

Go For It Even If It's Impossible !

 

[pbxn]

We have 3 sites tied to each other in a geo-redundant setup with the same issue. Timers have been played with with no success. Currently in nortel/avaya's development team hands.
All are patched up to date and on rls. 6. Will post back when and if they come up with a solution. (btw its been in their hands for going on 3 weeks. )

 

[fallenangel1]

Two Trunks got perfect after timing change. One still ringing on 3rd bell. Tried changing its RGV to 128 but no use.

Thanks anyways for your Kind guidance.

Go For It Even If It's Impossible !

 

[NoypiToits]

Try to disable / enable the cardof the trunk..

Villareal

 

[fallenangel1]

Done that right after committed the changes.

Go For It Even If It's Impossible !