Delay in connecting to extension

[michont]

I'm curious to know what others may think may be happening to some of my extensions. I recently was told by somebody
that they could dial some people at another building of ours with no issue but when dialing a few extensions in particular,
there was a delay in hearing the ring. I checked myself and when dialing most #'s at that building, everything
seems fine. The few #'s that were mentioned will go through but there is 10 second delay or so before you start to
hear the ringing of the other extension. I looked up these extensions and they are all on the same digital line card.
If I stat the TN, it shows a normal status. Any thoughts?


BTW, what is the stat command to stat the whole line card? It's been a while. : )

 

[janaya]

if they are all on the same card, move a couple to another card and see if it still happens.

you stat a phone

stat 4 0 5 0 (large syste)
stat 4 5 (small system

you stat a card...just take off the last digit

stat 4 0 5
stat 4



John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/Edit

 

[michont]

Thanks. I will be trying that. I just wonder if I card could be bad but still work? I know that sounds a bit strange.