Definity to magix

[jeepguy267]

I have a Definity and magix neworked together via point to point PRI. On 4 digit dial from definity to magix I get Call ID number, but no name. Magix is release 2.2. How can I get the call ID name to come accross the point to point?

I also put this in the definity forum, Sorry for the double post if you are in both forums

 

[Telecomboy]

No Caller ID Name on a PRI on a Magix. Only if you are using POTS lines can you get Caller ID Name.

 

[jeepguy267]

True for central office trunks. Is this also true for point to point to a definty? I am told that it should work and maybe the magix needs to be upgraded to a 4

 

[SYQUEST]

Have you read the Legend Network Reference document?

Are all the parameters set correctly on both switches?

The switch types for the tandem PRI facilities should be verified.

....JIM....

 

[jeepguy267]

I do have the networking reference and it doesnt say either way about this one particular feature. It was written for r6.1 legend, if this is a magix r4 feature it wouldnt be in the doc anyway. All else is working so I beleive my paremeters must be correct.