ihatehndls
Technical User
I need to add two T-1 circuits from Qwest to this machine. Can anyone help me? They will be sending DID digits. These will also be used for outgoing calls.
Thanks
Rex
Thanks
Rex
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Definity G3si V11
- Thread starter ihatehndls
- Start date
- Status
- Thread starter
- #3
ihatehndls
Technical User
sorry, it's a definity G3si V-11 I thought I put that in the header. Maybe I didn't
It's not quite that easy to expalin how to add T-1's on a Definity. Do you have the circuit packs, CSU's ect. How are the T's set up- PRI or are they channelized? If they are PRI, do you have RTU software turned on for PRI?
There are a lot of different things that have to be known before you can turn the circuits up. But if you'll give me the info i will try to help you.
There are a lot of different things that have to be known before you can turn the circuits up. But if you'll give me the info i will try to help you.
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question