We have 4 analog lines connected to the Rightfax. We have 3 hunt groups set up with DID numbers and all 4 analog lines are in all 3 hunt groups. We want the Right fax to route based on which DID number is called, but it doesn't seem to work. Does the G3 send the DID hunt number with the call or the analog lines station number? Is ther a way to make it send the DID hunt number.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Definity g3 to Rightfax via DID hunt group
- Thread starter sbeaver18
- Start date
We route to our rightfax server using a UNIPLAN
add uniplan 1 and put the routing information there.
It works really well.
ch uniplan 1
UNIFORM DIAL PLAN TABLE
Percent Full: 1
Matching Insert Node Matching Insert Node
Pattern Len Del Digits Net Conv Num Pattern Len Del Digits Net Conv Num
3333 4 0 222 aar n
4444 4 0 222 aar n
add uniplan 1 and put the routing information there.
It works really well.
ch uniplan 1
UNIFORM DIAL PLAN TABLE
Percent Full: 1
Matching Insert Node Matching Insert Node
Pattern Len Del Digits Net Conv Num Pattern Len Del Digits Net Conv Num
3333 4 0 222 aar n
4444 4 0 222 aar n
- Status
Similar threads
- Locked
- Question