Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Definity DS1 Card = 1 T1???

Status
Not open for further replies.

saphiamond

Technical User
Jul 18, 2006
104
US
Good Day,

Im almost positive about this, but I wanted to confirm: Each Definity G3 DS1 Card supports only 1 T1 right?

Also what interface is on it? What kind of connections?


Cheers,
Andre
 
That is correct the TN767 or TN464 T1 interface cards will only support 1 T1/DS1 or a E1 if you are in Europe. The interface on the switch will be through the anphenol connection on the back side of the carrier/gateway that the card is seated in. How you connect to the anphenol connection on the back plane of the switch will be determined by your structured cabling. Hope that helps!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top