Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Definity Audix Sandwich Board Setup

Status
Not open for further replies.

drewmich

IS-IT--Management
May 26, 2001
169
US
Having problems with a 556/2169 older Definity Audix on a G3Si8.4 test switch. Installed it correctly into slots 9 and back but can't seem to get it to come up in the switch successfully. Board tests ok, but no communication with the 715?? Have the correct "octupus" cable - H600-475-GR2,I2. The Audix seems to get stuck at OS loading. It worked fine at another switch on site where it was de-installed, but we need help with config and connections here.

Maybe one of our techs installed the cabling or programming wrong.

Any tips on setting up the hardware - cables and connections to the 715 terminal and also programming in the switch would be greatly appreciated.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top