I was called to replace a 1232 destroyed in a power surge. I got a used 1232, defaulted it, and installed it. I did not have my laptop with me as this was unplanned. So the system came up with CO lines 2,4,6 live but 1,3,5 are dead. Also, it seems only some extensions came up. Is this normal for the 1232? I am new to this system but I have the DBA software. Just seems odd that the extension and co lines are working that way.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Defaulted 1232 and missing COs and STA's
- Thread starter pmcook
- Start date
bigglesnz11
Technical User
Programming was probably set up with system using tks 246 ( 1 line per cord)
What sort of connectors are used for extension 25 pair champ or others?
What sort of connectors are used for extension 25 pair champ or others?
- Thread starter
- #3
bigglesnz11
Technical User
Any pattern of which ectensions came up?
the champ plugs would sometimes not seat correctly at the cable end of the plug,
the champ plugs would sometimes not seat correctly at the cable end of the plug,
- Status