Default Route Command

[DanielBowen]

Can anybody tell me the command to add a default route to an IP routing table?

I want to tell the router to forward all traffic not destined for an address on our network to be forwarded to a VLAN interface on an RSM. The command I am issuing is on the RSM also.

Thanks in advance

Daniel,

 

[wybnormal]

Depends..

ip route 0.0.0.0 0.0.0.0 next hop

THis provides the next hop for anything the router doesnt know what to do with.

Policy routing can filter the packets and route to a certain interface.. I did this to take packets coming in on E0 and take the web traffic back out on E0/1 which pointed to a different vendor router.

A static route will overrule the Routing protocol's table so anything static would redirect as you want.

MikeS Find me at

http://www.packetattack.com

"Diplomacy; the art of saying 'nice doggie' till you can find a rock" Wynn Catlin

 

[DanielBowen]

Thanks for the response.

I thought it may be ip route 0.0.0.0 0.0.0.0 vlan 500 instead of 0.0.0.0 0.0.0.0 (next hop IP)

Thanks again,