Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Default GateWay

Status
Not open for further replies.
Oct 2, 2007
80
US
How would I find the default gateway on my PBX? Is it thru ld 117?
 
Have a Signaling Server?
configuration
IP Telephony
edit
expand Node - Management Lan (ELAN) gateway IP address
is second item down

cancel out....

Mato' Was'aka
 
For the Call server (PBX) you can go to LD 117 and TYPE STAT ROUTE.
 
i went into LD 117 and typed stat route, it crashed my system, took all the soft phones off line, any idea's on that?

thanks for all the help.
 
Wow... sounds like you have issues on that system....

Going to loads should not crash systems.... especialy if you are not making changes....

What type of system and RLS?
 
LD 117 as per above info:

PRT ROUTE
Print routing table entry(ies) information stored in database

STAT ROUTE
Display host and network routing table
 
Sig server?
Opt11?
Large system?
RLS of Software...???

Not sure what you have, there are differences in commands...
 
I have a CS1000B and 2 CS1000B's, one OPT11C, i am trying to get my OTM server to see each of them.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top