Default Call routing

[coladmin]

How can I change the routing of a call when only 10 digits are dialed for long distance( the 1 is not dialed jsut the area code an the number). I would like these calls to go out over a LD-T1 instead of pool 70 which is our PRI

Thanks in advance

 

[Pepperz]

Have the callers dial the 1 anyway, then absorb it in the ARS tables.

Pepperz at newper dot net

 

[coladmin]

the problem is that the PRI does not have LD codes on it and users are have figured out that if they dont dial 1 then they can make all the calls they want. I could put ld codes on the PRI as well but I would rather not as I have a fax applciation that is unable to append a ld code

basically how can I force 10 digit calls to go out over the LD trunk group and not the local trunk group

 

[Pepperz]

Set the PRI routes to have a higher ARS level, say 4, then only ARS 4 or higher extensions can get out. If the other users are set at default level which is 3, that will work.

Pepperz at newper dot net