Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DECT

Status
Not open for further replies.

iptuser

Technical User
Apr 16, 2003
473
GB
We ave been given a DECT card in an op11 REL. 25.15 for testing however the default IP adress has been changed to a new one but it does nto seem to answer, can you reset the adress back to the default one if so how? We have connected the p3 cable (RJ45) from the DECT card into a Hub and as well as the OTM. There are not part of any LAN but you can not telnet on to it or ping with the IP adress we have been given. Once you install the DECT card in the slot- currently 7 is there anything on the Meridian you need to configure it to bring it into service? what about the OTM


thanks

wayne67
 
vztech,


It a wireless card within the Nortel system for Wireless phones

wayne67
 
SO YOU WILL HAVE TO CONNECT FROM THE SERIaL PORT OF THE CARD WHIC IS AT THE J CABLE CONNECTIONS wýth rs232 cable AND CHANGE THE IP ADRESS

dasuser
dasuser
ipconfig xxxx.yyyy.zzzz

xxxx ip adresss
yyyyy subnet

zzzzz gateway

 
We now have it up and working

thanks

wayne
 
Hi wayne67,

I have got the same problem. Can u help me to get it solved?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top