I have a CS1000E running Rlse 5.50 and DECT. The DECT cards are split in slots 0-0-3, 0-0-4 of the Media Gateway and 0-0-7 of the expansion. We are having trouble with the DCS sets registered to DMC in slot 0-0-7. We are getting one way transmission between DCS sets and are unable to register sets to the card. The DMC has been replaced, but to no avail. Any ideas??
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DECT
- Thread starter mertech
- Start date
I thought there was something about not starting with 0-0 because of the way Nortel resources are setup. Maybe that is why you have trouble with slot 7 (timeslot issue)? I looked in our 5.5 MGs and found some MC32s and DLCs in slot 7 but also some slot 7's that are empty. Wish I could help you more, but we don't do DECT here or use DCS sets.
- Status
Similar threads
- Locked
- Question
