DECT R4 Installation

[gabi42]

Hello,
I am going install a new installation with 2 sites. There sites are connect with mpls.

In the first site: I will install one server edition with one gateway Avaya
Informations first site: IP address server edition R9.1: 192.168.100.1, Gateway Avaya: 192.168.100.2, Internet Gateway: 192.168.100.254
In the first site: I install 4 dect r4.
IP Address DECT R4 : 192.168.100.10 192.168.100.11 192.168.100.12 and 192.168.100.13

In the second site: I just install 4 dect r4
Informations second site: Internet gateway 192.168.101.254
IP Address DECT R4 : 192.168.101.10 192.168.101.11 192.168.101.12 and 192.168.101.13
Please could you help me to configure the line 240 in server edition, the master base… ?

Thanks you,

Gael

 

[IPOLackey]

Follow the install instructions on the Knowledgebase. (

http://marketingtools.avaya.com/knowledgebase/businesspartner/index.html)

If it breaks then ask.

 

[derfloh]

Install all base stations at site B as slave stations but chose one that will act as air sync master. Define a sync region different from that at site A in all base stations at site B.

So you will have sync region 0 at site A and sync region B at site B with it's own air sync master.

 

[intrigrant]

Do not leave the master on Air sync region 0 but set it as Air sync master region 1 and the other one as Air sync master for region 2.
Leaving it on region 0 cause problems like dropping calls, phones loosing subscription etc.
And use the provisioning feature with the option "Preconfigured" enabled.
Then you must add IP DECT phones manually with the IMEI number of the phone and in the master base stations you go to users and enable subscription by clicking on the IMEI number.
That is the best trouble free way to install.
We have a lot IP DECT installs and using this config is very stable, any other will cause strange problems to happen.

 

[gabi42]

Thanks you.

 

[Pepp77]

For DECT R4 we always do a non provisioned installation as had so many issues with provisioned installation. Currently in the process of planning a 40 base station install for the new year.

| ACSS SME |

 

[intrigrant]

I always do a provisioned installation but only with "Preconfigured" extensions enabled and auto create user/phone disabled.
It never fails.