dect problems on mfim 50b

[nitram11]

Hi all,

having problems with the dect solution on a mfim 50b; this is what is programmed; a mixed number of working digital, analog and ip stations ( from max. 50 ports 48 are used ) ; for the dect solution a wtim4 gateway is registered at the mfim and running; for testing this , i have connected one ( planned are 4 ) GDC 600 B basestation to the wtim; registering of 4 handsets GDC 450H with no problems;
calls between the different station are signalled, but a speech connection will establisch only on the 6-7 trial; the same is with a free dial tone on the dect handset: when i got it (after several trials) there, then the speech connection works; if not, speech connection does not work. The most often missing dial tone problem is only on the dect side.

Thanks for all hints and ideas.

 

[Mr.Phones]

Hi

I came across this on an older IPLDK300 and ended up swapping the GDC600B's to GDC600BE's which resolved the issue.

I cant say for sure that it will resolve your issues but worth getting hold of a GDC600BE to test with.

Cheers

Phones.

 

[nitram11]

Hello, Mr. Phones
thanks, had already try this before; no help; but now found another mistake , which could be the reason: when looking in the lan settings on the wtim4 direct, there was the ip value of the standard gateway missing,(0.0.0.0); when setting the right ip of the router and confirm this, after reset the value is lost? try this some times , but the value always return to 0.0.0.0; any idear ?
will ask for it in a new thread...

 

[Wishforall]

Hi nitram11,

Is your MFIM50B and your WTIM4 both on the latest firmware?

Thanks,
Wishforall