dect problems: could not set ip value for Gateway in lan settings WTIM4

[nitram11]

Hello all,
i need help with o.a. discribed problem; when connecting direct on a wtim4 (works in a system with Mfim 50b, see thread before) and try to set ip adress of gateway in "lan settings" there, after reset the gateway has not capture the value (was back to 0.0.0.0); setting of subnet mask + ip adress of wtim seems to be alright;

any idear ? may be, that something has to be changed in the settings of the Mfim50b before ?

thanks a lot for any advice !

 

[Wishforall]

Hi nitram11,

Is your MFIM50B and your WTIM4 both on the latest firmware?

Thanks,
Wishforall

 

[nitram11]

Hello, Wishforall,

thanks for your post, at least you are right, a firmware update for the wtim 4 brought the solution - whatever had been changed there...?

greetings, nitram11

 

[Wishforall]

Hi Nitram11,

Firmware upgrades should always be done if all your setting are correct and nothing has changed on the network. A lot of LG issues can be fix with a simple firmware upgrade.

Regards,

Wishforall.