DECT Keeps Rebooting

[Chriswilken]

My client is running a 1000S system. We have configured the Dect card (DMC8 NTCW00ac) in slot 9,, TN 39. The problem that we are experiencing is that no matter what changes you make in OTM the Card keeps rebooting itself. It will stay connected and then disconnect the TN like the card has been removed and will then re enable the card again. You can then work on OTM again and make the changes for a couple of minutes the it reboots again or you get error Card is authenticating. We are in desperate help are there any patches available or any one with ideas.

 

[TKNortel]

Hi ,
for small systems you need an DMC8-E.

If the DMC8-E is used in an Small System cabinet or chassis, and must be
located in card slot 9, 19 or 29. Do not install a DMC8 in slot 9, 19 or 29 of a
Small System cabinet or chassis.

cheers


cheers
TKNortel