Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DECT hunt group

Status
Not open for further replies.

ipohead

IS-IT--Management
Oct 21, 2010
948
GB
Just adding some D100s to R11

I was going to add them to the Main huntgroup but the manual says

•Collective All available phones in the User List phones ring simultaneously. Although DECT handsets can be programmed as members of groups and receive calls in the same manner as any other extension within that group, you must not configure DECT handsets into collective groups.

Do I just create a separate huntgroup as sequential and add to the ICRs?
 
I think the problem is the amount of channels. Default is 8 channels and if you use a lot of dect phones in a group and they are all on the same basestation then this will give issues.

BAZINGA!

I'm not insane, my mother had me tested!
 
That makes sense as it is 8 handsets max per base station. There are 5 in all but only 1 needs to be in the group for now.

The ICR for ordinary phones is Linegroup 0 /destination 400 Main but it seems I can't create another one for Linegroup 0 /destination 4000 DECT.

I've come across creating a virtual user with internal twinning but would like to keep things as simple as possible.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top