DECT - DMC

[Dasheen]

Does the DMC 320 need to be connected to the BCM in order to do basic programming such as changing the pswd?

 

[Khosher]

No not at all, just use serial

 

[Dasheen]

I'm using the same cable I use to get into a BCM via the serial port and can't connect to the DMC. Say DMC not detected.

 

[Deweyhumbolt]

Make sure your using the serial port closest to the front of the DMC, becuse they're two.

 

[Dasheen]

I'm using the top one that has a computer icon above it.

 

[Dasheen]

Shows CTS and DSR as active.

 

[CTCINY]

Make sure you are using a null modem cable not just a serial.

What doesn't kill you only makes you stronger.

 

[Deweyhumbolt]

When your in the wrong one, the CTS still shows. I never saw the icon, but if it's mounted on wall, it's the closest to the front, guess if it's laying on a table or rack it would be top. But like CTCINY says, it needs to be null.

 

[Dasheen]

Connecting to a BCM via serial port requires a null modem cable doesn't it? That's the same cable I'm using.

I'll have to buy another cable.