Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DECnet on OpenVMS
- Thread starter kingus
- Start date
- Thread starter
- #3
The next question then is do you have an end-node or full-function license? An end-node license will only allow one circuit to be enabled.
$ ncp show known lines <- NICs
$ ncp show known circ <- DECnet
$ ncp set/define circ/line bna-0 state on/off
Set makes changes to the running system. Define changes the permanent database. Substitute your interface for bna-0.
Dan
$ ncp show known lines <- NICs
$ ncp show known circ <- DECnet
$ ncp set/define circ/line bna-0 state on/off
Set makes changes to the running system. Define changes the permanent database. Substitute your interface for bna-0.
Dan
- Status
Similar threads
