Hi all,
I'm not sure this is the right forum to post my question.
I have a Dec MultiChassis which contains three switch cards and three hub cards.
On this equipement, there's a backplane lan connecting the first switch card with the hub cards through four switch ports.
I saw with HP Openview that these ports have periodic utilization burst at 80%.
I wanted to know if this can be considered as a network problem or if it's a "feature" of such an equipement.
In case of the first solution, what should be the remedy.
Thanks for your help
FX
I'm not sure this is the right forum to post my question.
I have a Dec MultiChassis which contains three switch cards and three hub cards.
On this equipement, there's a backplane lan connecting the first switch card with the hub cards through four switch ports.
I saw with HP Openview that these ports have periodic utilization burst at 80%.
I wanted to know if this can be considered as a network problem or if it's a "feature" of such an equipement.
In case of the first solution, what should be the remedy.
Thanks for your help
FX