debug r1t1 2

[bkrike]

trying to get installer password on an r1t1 MICS.
I have never done a debug, and did not have much luck trying.

Will remote debug through my RAD give me anything I can use? (R1T1 cant use the RAD browser tool)

 

[bkrike]

got it with debug through the phone so thanks anyway, and a big thanks to executone for his FAQ.

BTW- I dont see it in the RAD memory dump. Is it there?

 

[exsmogger]

I think you may be able to see the config password using Norstar Manager.

Brian Cox

http://www.jandjcommunications.com

 

[bkrike]

Regarding manager... I don’t know. I was using ICSRT (NRU10). I don’t think I kept any older NRU versions. Version 10 does not seem to have anything called manager, and it was not letting me do anything except remote set, and remote debug, due the fact it was R1T1.

Anyways, like I said, I got it with debug. I was just wondering if remote debug related to the local phone debug, and if so, how it correlates. I could not visualize the password from the text dump with my cursory look.

 

[MarvO1]

Just an added FYI. Exsmogger is correct. You can see the config password with Norstar Manager on R1T1, but Nortel quit shipping Norstar Manager with NRU when 10.0 came out, so hang on to you older NRU versions if you need to use Norstar Manager on older systems.

MarvO said it

 

[Arr]

bkrike,

You CAN use the RAD or FastRAD with NRU 10 and debug your R1T1 using the set emulation tool. As long as you can log into the RAD, then you will have the set emulation. You will, however, need the admin password to use debug. I've tested it this eve.

PhM