Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Debug H323 Calls Betwen BCM50 and CS1000S Rls 7.5

Status
Not open for further replies.

banbdi

IS-IT--Management
Sep 16, 2010
24
0
0
DO
Hi guys thanks for your time and help.

i have issue i need to debug the calls between my bcm50 and my CS1000S

My problem is:

I have BCM50 connect to CS1000S Using H323 Trunks and my CS1000S is connect to Asteriks using T1 Cards Pri Signalling and asterisk is connect to 1 PSTN, 2 SIP Trunk , 3 GSM Gatway in/out

when a user from BCM50 Make a call on the asterisk i recieve a empty callerid but if one user from the CS1000S make a call i can see the extension number of the user on my asterisk.

user calling from bcm50 using 9
Accepting call from '' to 'XXXXXXXX' on channel 0/23, span 4

user calling from cs1000S using 9
Accepting call from '4839' to 'XXXXXXXX' on channel 0/23, span 4

note: if some user from bcm50 make a call to internal extension of the cs1000S i can see the bcm50 user extension my problem is only when user need to make a call to outside

thansk guys.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top