DDSM

[dreb20]

Hi All,

why some area is DEFECT what is the cause and how to make it INservice some area.thanks. below is the details.

DIS-DDSM;
H500: AMO DDSM STARTED
CONTROLLER: 1 IS ACTIVE LOAD DEVICE, LOAD AREA IS: DS:
TYPE: HD SS-NO : <STDH5> SIZE : 3884 MB ( 62158*64KB) GRAN : 512
NON-RMX PARTITIONS:
SYSTEM ID SYSTEM NAME BEGIN / NO OF SECTOR(S) SIZE
H'12 UNIXWARE H' 7995F0 H' 139C5 39 MB ( 627*64KB)
H'63 UNIXWARE H' 7ACFB5 H' 6230DC9 50273 MB ( 804379*64KB)
H'63 UNIXWARE H' 69DDD7E H' 5DE2BF 3004 MB ( 48069*64KB)
AREA: A NAME : A1H1A STATUS : I N S E R V I C E
AREA-SZ: 0 MB (2 *64KB) A-GRAN: 512
AREA: E NAME : A1H1E STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
DS:
ACTIVATED LOGICAL NAMES:
DS:
AREA-SZ: 450 MB (7200 *64KB) A-GRAN: 4096
AREA: F NAME : A1H1F STATUS : D E F E C T
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
BDA:,BD:,:TMD:,AS:,:AMD:,MP:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 100 MB (1600 *64KB) A-GRAN: 4096
AREA: G NAME : A1H1G STATUS : D E F E C T
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:CGD:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 150 MB (2400 *64KB) A-GRAN: 4096
AREA: H NAME : A1H1H STATUS : D E F E C T
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
MS:,SY:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 70 MB (1120 *64KB) A-GRAN: 4096
AREA: I NAME : A1H1I STATUS : D E F E C T
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:SCR:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 2047 MB (32767*64KB) A-GRAN: 4096
AREA: J NAME : A1H1J STATUS : D E F E C T
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:GLA:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 450 MB (7200 *64KB) A-GRAN: 4096
AREA: K NAME : A1H1K STATUS : D E F E C T
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL

 

[sbcsu]

TRY:

CHA-DSSM:A1,1;
ACT-DSSM:A1,1;

 

[dreb20]

Hi SBCSU, i will try this on friday since the customer is in go live right now. thanks ill give you feedback once command is done..BTW, the current setup is duplex and I notice that the supposed to be "standby" dscxl is showing some numbers and 3 dash on the 9-segment display. It doesn't show the "S" status on the 9-segment.. Any info bout this as well? thank you very much.

 

[donb01]

Sounds like that processor hasn't booted successfully. You may have to do a restart on it and try again. Make sure the other processor has the A, the word "act" on the right side, and ".adp" on the bottom left. That means everything is running off that processor. Sometimes the .adp (Assistant) might still be running on the other processor, but that sounds like it's not booted.

Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA

 

[dreb20]

hi Donb01

I already restart the standby processor but still same error. and we notice that cabinet1 is restarting by itself continuos. then try disconnect cable from standby processor which is not booting properly cabinet1 back to normal status. try command DIS-VEGAS;
H500: AMO VEGAS STARTED
F02: VEGAS FILE CANNOT BE READ.
DMS STATUS:

sta-hista
RTYPE = searchb
STIME = 2019-05-06/06:00
ETIME = 2019-05-06/14:00
ANS = ;
STA-HISTA:SEARCHB,2019-05-06/06:00,2019-05-06/14:00,;
H500: AMO HISTA STARTED
F14: ANOTHER JOB IS CURRENTLY BEING EXECUTED OR THE HISTO FUNCTION IS DISABLED


DIS-DDSM;
H500: AMO DDSM STARTED
CONTROLLER: 1 IS ACTIVE LOAD DEVICE, LOAD AREA IS: DS:
TYPE: HD SS-NO : <STDH5> SIZE : 3884 MB ( 62158*64KB) GRAN : 512
NON-RMX PARTITIONS:
SYSTEM ID SYSTEM NAME BEGIN / NO OF SECTOR(S) SIZE
H'12 UNIXWARE H' 7995F0 H' 139C5 39 MB ( 627*64KB)
H'63 UNIXWARE H' 7ACFB5 H' 6230DC9 50273 MB ( 804379*64KB)
H'63 UNIXWARE H' 69DDD7E H' 5DE2BF 3004 MB ( 48069*64KB)
AREA: A NAME : A1H1A STATUS : I N S E R V I C E
AREA-SZ: 0 MB (2 *64KB) A-GRAN: 512
AREA: E NAME : A1H1E STATUS : I N S E R V I C E
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
DS:
ACTIVATED LOGICAL NAMES:
DS:
AREA-SZ: 450 MB (7200 *64KB) A-GRAN: 4096
AREA: F NAME : A1H1F STATUS : D E F E C T
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
BDA:,BD:,:TMD:,AS:,:AMD:,MP:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 100 MB (1600 *64KB) A-GRAN: 4096
AREA: G NAME : A1H1G STATUS : D E F E C T
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:CGD:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 150 MB (2400 *64KB) A-GRAN: 4096
AREA: H NAME : A1H1H STATUS : D E F E C T
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
MS:,SY:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 70 MB (1120 *64KB) A-GRAN: 4096
AREA: I NAME : A1H1I STATUS : D E F E C T
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:SCR:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 2047 MB (32767*64KB) A-GRAN: 4096
AREA: J NAME : A1H1J STATUS : D E F E C T
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:GLA:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 450 MB (7200 *64KB) A-GRAN: 4096
AREA: K NAME : A1H1K STATUS : D E F E C T
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
IAG:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 616 MB (9868 *64KB) A-GRAN: 4096
CONTROLLER: 6
TYPE: HD SS-NO : <CF2G0> SIZE : 1953 MB ( 31263*64KB) GRAN : 512
AREA: A NAME : A1H6A STATUS : P R E S E N T
AREA-SZ: 0 MB (2 *64KB) A-GRAN: 512
AREA: E NAME : A1H6E STATUS : B L O C K E D B Y A M O
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
DS:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 450 MB (7200 *64KB) A-GRAN: 4096
AREA: F NAME : A1H6F STATUS : B L O C K E D B Y A M O
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
BDA:,BD:,:TMD:,AS:,:AMD:,MP:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 100 MB (1600 *64KB) A-GRAN: 4096
AREA: G NAME : A1H6G STATUS : B L O C K E D B Y A M O
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:CGD:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 150 MB (2400 *64KB) A-GRAN: 4096
AREA: H NAME : A1H6H STATUS : B L O C K E D B Y A M O
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
MS:,SY:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 70 MB (1120 *64KB) A-GRAN: 4096
AREA: I NAME : A1H6I STATUS : B L O C K E D B Y A M O
AREA-DATA IN DATABASE AND ADMINISTRATION AREA ARE EQUAL
CONFIGURED LOGICAL NAMES:
:MOD-SCR:
NO LOGICAL NAMES ACTIVATED
AREA-SZ: 1183 MB (18940*64KB) A-GRAN: 4096


thanks

 

[sbcsu]

Do not turn off the system.
Contact your local next level of support
Hard Drive(s) will need to be changed out

 

[donb01]

Assuming this is a 4K, what version are you running? V8, V7, V6, V5?? Some of the newer releases have HD Recovery features - your vendor will know more. You will need to have a replacement drive that is essentially equal to what is in there. I know V7 uses a 250GB Toshiba MK2561GSYB drive that is getting hard to find, but you can still get them if you look, and I have also used a Seagate Momentus 7200.4 250GB drive ST9250410AS for backup purposes with no issues to date.


Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA

 

[dreb20]

Hi SBCSU,

actually H4K V5. ill ask the vendor regarding this. thank you.

 

[donb01]

Yeah - that is still back in the unixware days. It is a different drive, and a special utility you need to set it up - PCHI, which I believe is posted in our downloads section, but I don't recommend you try that one yourself. If it had been V6 or newer I may have been more encouraging, with it being a duplex system, because it's not that hard.

Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA