Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DDRSM aborts with message "Area is inconsistent, STA-INIT"

Status
Not open for further replies.

kevin906

MIS
Aug 4, 2006
167
US
Attempting to backup the system on CF. Area E, F, and G all copy over OK with DDRSM. Area H aborts with message about being inconsistent. I have done a STA-INIT on all of the partitions many times, I have STA-INIT on A1H1H and done a restart to implement the DBSYNC/LOGBUCH area. I can do a STA-COPY from A1H1H to A1H6H, but DDRSM fails every time. This system recently had the disk replaced. The automated backups are failing to complete because of the failure on AREA H.

ADD-DCSM:A1,1,HD,"STDH4";
ADD-DASM:A1,1,3200&992&2400&1120&32767&3200&9868,4096&4096&4096&4096&4096&4096&4096;
ADD-DLSM:A1,1,E,":pDS:";
ADD-DLSM:A1,1,F,":DBDA:"&":DBD:"&":TMD:"&":pAS:"&":AMD:"&":DMP:";
ADD-DLSM:A1,1,G,":CGD:";
ADD-DLSM:A1,1,H,":DMS:"&":DSY:";
ADD-DLSM:A1,1,I,":SCR:";
ADD-DLSM:A1,1,J,":GLA:";
ADD-DLSM:A1,1,K,":DIAG:";
ADD-DCSM:A1,6,HD,"CF1G3";
ADD-DASM:A1,6,3200&992&800&1120&12817,4096&4096&4096&4096&4096;
ADD-DLSM:A1,6,E,":pDS:";
ADD-DLSM:A1,6,F,":DBDA:"&":DBD:"&":TMD:"&":pAS:"&":AMD:"&":DMP:";
ADD-DLSM:A1,6,G,":CGD:";
ADD-DLSM:A1,6,H,":DMS:"&":DSY:";
ADD-DLSM:A1,6,I,":MOD-SCR:";
AMO-DDSM -111 DISK STATUS
REGENERATE COMPLETED;


STA-INIT:A1,A1H6H,;
H500: AMO INIT STARTED
H01: CREATE AND WRITE FNODE FILE
H02: INIT FOR <:A1H6H:> COMPLETED
H03: INIT FINISHED
STATUS = H'0000
AMO-INIT -111 HARD DISK AREA INITIALIZING
START COMPLETED;


COPY-DDRSM:A1,1,H,6,H,;
H500: AMO DDRSM STARTED
H01: WARNING: YOU ARE GOING TO OVERWRITE THE AREA/DEVICE <:A1H6H:>
DO YOU REALLY WANT THIS (Y/N)?
*y
y
F06: AREA <:A1H6H:> IS INCONSISTENT
AMO-DDRSM-111 DEVICE DOUBLE RECORDING SERVER MODULE
COPY NOT COMPLETED;
 
The procedure is normally as follows:
Insert new CF Card

DEA-DSSM:A1,6;
STA-INIT:A1,A1H61;
Y
ACT-DSSM:A1,6;
DEA-DSSM:A1,6;



COPY-DDRSM:A1,1,E&F,6,E&F,N;

Try another CF Card
 
check the areas of HDD and Cf are equal.

From Version 4.0 I area should be copy as below.


DEA-DSSM:A1,6;

DEL-DASM:A1,6;

DEL-DCSM:A1,6;


ADD-DTSM:A1,HD,18932,512,"CF1G3";

ADD-DCSM:A1,6,HD,"CF1G3";
ADD-DASM:A1,6,3200&992&2400&1120&11217&3200&9868,4096&4096&4096&4096&4096&4096&4096;
ADD-DLSM:A1,6,E,":pDS:";
ADD-DLSM:A1,6,F,":DBDA:"&":DBD:"&":TMD:"&":pAS:"&":AMD:"&":DMP:";
ADD-DLSM:A1,6,G,":CGD:";
ADD-DLSM:A1,6,H,":DMS:"&":DSY:";
ADD-DLSM:A1,6,I,":SCR:";
ACT-DSSM:A1,6,,I;

CHA-DSSM:A1,6;
DEA-DSSM:A1,6;

STA-INIT:A1,A1H61;
ANS = y

COPY-DDRSM:A1,1,E,6,E;

ACT-DSSM:A1,6,,I;

ACT-DSSM:A1,1,,I;

STA-COPY:":A1H1I:/",":A1H6I:/",A1;

<:A1H1I:#FREESPACE> -> <:A1H6I:#FREESPACE> ?
ANS = n

<:A1H1I:#FREEFNODE> -> <:A1H6I:#FREEFNODE> ?
ANS = n

<:A1H1I:UW7/APPL/ACDAPP.GZ> -> <:A1H6I:UW7/APPL/ACDAPP.GZ> ?
ANS = c
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top