DDI to extension mapping

[johnboy03]

Hi can someone please tell me where the Mitel 3300 maps its DDI's to extensions? Is there a table form? Thanks

 

[bobcheese]

there are a couple of ways to do this. First of all you need to know how many digits of the DDI you are receiving from the servce provider and then look at how the 3300 is set to treat those digits in trunk service assignment.
Basically if your ext numbers match the digits you are receiving then the DDI is automatically mapped to the corresponding ext.
For example: DDI 654321 (receiving last 4 digits from service provider) would automatically be mapped to ext 4321 if it existed. If it didnt and you wanted it to go to a completley different ext then you can use system speedcall assignment to map these. Eg. speedcall 4321, actual number 200 would map DDI 4321 to ext 200.

 

[kwbMitel]

Adding to bobcheese:

I always use speedcall tables, even when the DDI matches. In this case I would insert nonsense digits to create my mapping.

Receive digits - 7654321
Trunk Attributes - Absorb 3 digits, Insert digits *#*
Speedcall Table - *#*4321 dials 4321

By using the above method you have full flexibility in translating (or not) the received digits.

**********************************************
What's most important is that you realise ... There is no spoon.