DChannel don't send all dialed numbers, I need to send 1010xxx

[nezc1969]

I have a route to the local PSTN on the Meridian Opt11 with an acod XX that I need to dial 1010XXX to get long distance access to the carrier, I realize that all digit are sent when I seize a channel from the route but the Dchannel is not sending all 1010XXX, then I got the message from PSTN saying the call can not got thru as dialed, I suspect is a problem with the DChannel configuration but not have idea how to change it to allow it to sent all digit, if someone can help it will be very appreciated Example:

.trac 278
ACTIVE TN 021 0 00 03
ORIG 021 0 00 03 0 MCR 0 278 2616
TERM 007 23 TIE RMBR 6 46
DIAL DN 6810101230115058832455
MAIN_PM DIAL AUX_PM COMPLETE
TALKSLOT ORIG 10 TERM 10
QUEU NONE
CALL ID 0 103

---- ISDN PRA CALL (TERM) ----
CALL REF # = 23
BEARER CAP = VOICE
CALL STATE = 4 DELIVERY
CALLING NO = 278
CALLED NO = 230115058832455

 

[senk1s]

wrong forum ..check the meridian forum ...
and make sure your CO is accepting the CIC codes that you are sending ...by law they are supposed to provide equal access to all carriers