dch

[bfuller83]

So what I am doing(Attempting to do) it repurposing an old video pri (dch 10) to use for a new site. So far I have successfully outed all the bch's for loop 27 I have successfully created a new route (27) for this when I attempt to add my bch's to my new route I get the below error:

REQ new
TYPE tie
TN 27 1
DES DOWNTOWN T1
PDCA
PCML
CUST 0
NCOS 0
RTMB 27 1

SCH4792
RTMB

Manual says that "SCH4792" is IFC for DCH/PRA does not match IFC of the route.

I know the problem is I probably need to out/chg my dch (10) and rebuild it with the proper parameters but I can't for the life of me figure out how to chg or out or new the dch. Any suggestions? Thanks in advance for any help!


Bradley A. Fuller
Manager, Network Infrastructure
Kellogg Community College

 

[KCFLHRC]

Definitely out the old route, out the old DCH and rebuild it. Here's how you do it

Ld 17
chg
Type ADAN
OUT DCH X

Then new DCH X

Print it first in LD 22 so you know what MSDL card it's on and what port.

 

[bfuller83]

So here is the prt from ld 22

ADAN DCH 10
CTYP MSDL
DNUM 10
PORT 0
DES VIDEOPRI2
USR PRI
DCHL 27
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC D100
SIDE USR
CNEG 1
RLS ID **
RCAP
MBGA NO
OVLR NO
OVLS NO
T200 3
T203 10
N200 3
N201 260
K 7

So out and create new? I am going to a meeting in 5 mins so I will be back at it in a few. Thanks for your help!!

Bradley A. Fuller
Manager, Network Infrastructure
Kellogg Community College

 

[KCFLHRC]

Yep, out it and rebuild it is the best. Just remember when you build it that it's on DNUM 10 Port 0. Change your DES accordingly and your IFC type.

 

[KCFLHRC]

You will have to disable the DCH in LD 96 before you can out it.

 

[bfuller83]

Thanks for the help! On our other pri's when you disable the dch and disable the loop, when you re-enable the loop it automatically re-enables the dch. This one doesn’t do that is there a place to tie those together? Thanks again. Now I have to figure out what is wrong with my option 11 pri card. I think it might have a bad card. =-)

Bradley A. Fuller
Manager, Network Infrastructure
Kellogg Community College

 

[SL1M1]

I would carry out MSDL/Dchannel Force Download to take those changes

Cheers!!