Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DCE for AIX 4.3.3

Status
Not open for further replies.

samirm

Technical User
May 12, 2003
80
US
Hi,
We are in a process to configure the HPOV ( HP Open View ) in bunch of AIX servers to get the system alert. While installing the DCE from the base OS CD, I can see the DCE supporting file s are present, but while installing its looking for prerequisite. The oslevel information is AIX 4.3.3 with ML11


dce.cds ALL
+ 2.2.0.5 DCE Cell Directory Services

dce.client ALL
+ 2.2.0.6 DCE Client Administrative Tools
+ 2.1.0.17 DCE Client CDS Tools
+ 2.2.0.5 DCE Client CDS Tools
+ 2.2.0.5 DCE Client Configuration Tools
+ 2.1.0.29 DCE Client Services
+ 2.2.0.6 DCE Client Services
+ 2.1.0.27 DCE DFS Client Services
+ 2.2.0.6 DCE DFS Client Services

dce.dfs_server ALL
+ 2.1.0.24 DCE DFS Base Server
+ 2.2.0.6 DCE DFS Base Server

dce.dfsnfs ALL
+ 2.1.0.13 DCE NFS to DFS Authenticating Gateway
+ 2.2.0.6 DCE NFS to DFS Authenticating Gateway

dce.edfs ALL
+ 2.1.0.22 DCE Enhanced DFS
+ 2.2.0.6 DCE Enhanced DFS

dce.msg.en_US ALL
+ 2.1.0.14 DCE Base Client Messages
+ 2.2.0.5 DCE Base Client Messages

dce.pthreads ALL
+ 2.1.0.7 DCE Threads Compatability Library

dce.security ALL
+ 2.1.0.27 DCE Security Services
+ 2.2.0.6 DCE Security Services

If I start the installation, its throwing the following error :-

*******************************************************************************
installp PREVIEW: installation will not actually occur.
*******************************************************************************

+-----------------------------------------------------------------------------+
Pre-installation Verification...
+-----------------------------------------------------------------------------+
Verifying selections...done
Verifying requisites...done
Results...

FAILURES
--------
Filesets listed in this section failed pre-installation verification and will not be installed.

Requisite Failures
------------------
SELECTED FILESETS: The following is a list of filesets that you asked to install. They cannot be installed until all of their requisite filesets are also installed. See subsequent lists for details of requisites.

dce.client.core.rte 2.1.0.29 # DCE Client Services
dce.client.core.rte 2.2.0.6 # DCE Client Services
dce.client.core.rte.admin 2.2.0.6 # DCE Client Administrative Tools
dce.client.core.rte.cds 2.1.0.17 # DCE Client CDS Tools
dce.client.core.rte.cds 2.2.0.5 # DCE Client CDS Tools
dce.client.core.rte.config 2.2.0.5 # DCE Client Configuration Tools
dce.client.dfs.rte 2.1.0.27 # DCE DFS Client Services
dce.client.dfs.rte 2.2.0.6 # DCE DFS Client Services
dce.edfs.rte 2.1.0.22 # DCE Enhanced DFS
dce.edfs.rte 2.2.0.6 # DCE Enhanced DFS
dce.security.rte 2.1.0.27 # DCE Security Services
dce.security.rte 2.2.0.6 # DCE Security Services

MISSING REQUISITES: The following filesets are required by one or more of the selected filesets listed above. They are not currently installed and could not be found on the installation media.

dce.client.core.rte 2.1.0.0 # Base Level Fileset
dce.client.core.rte 2.2.0.0 # Base Level Fileset
dce.client.core.rte.admin 2.2.0.0 # Base Level Fileset
dce.client.core.rte.cds 2.1.0.0 # Base Level Fileset
dce.client.core.rte.cds 2.2.0.0 # Base Level Fileset
dce.client.core.rte.config 2.2.0.0 # Base Level Fileset
dce.client.dfs.rte 2.1.0.0 # Base Level Fileset
dce.client.dfs.rte 2.2.0.0 # Base Level Fileset
dce.dfs_server.rte 2.1.0.0 # Base Level Fileset
dce.edfs.rte 2.1.0.0 # Base Level Fileset
dce.edfs.rte 2.2.0.0 # Base Level Fileset
dce.pthreads.rte 2.2.0.4 # Fileset Update
dce.pthreads.rte 2.1.0.0 # Base Level Fileset
dce.security.rte 2.1.0.0 # Base Level Fileset
dce.security.rte 2.2.0.0 # Base Level Fileset

AVAILABLE REQUISITES: You specified that requisite software should be automatically installed. Additional filesets (2) would have been installed automatically had the selected filesets passed all requisite checks.

======================================================

How can I find these DCE old version so that I can update them with AIX4.3.3 base media. I tried all the way but unable to load them. And due to this the HPOV configuration is stuck for all these servers.

Can someone help me out on this ?

Thanking you .

Sam
 
usually, when you see an error like this, it means that you're dealing with a licensed program and need the install disks for the software... which are purchased seperate from the OS.

if i remember right, dce was packaged this way, back when 4.3.3 was suppported. (and still may be, i haven't used it in ages).

to be sure, if you have the all of the installation disks for AIX and you cannot find the base level of a fileset, then it's licensed outside of the OS.
 
Hi Breslau,

I tried all of the CDs but I couldn't locate DCE requisites from them. So you mean DCE doesn't come by default with the AIX 4.3.3 base OS CD ?

Thanks & Regards,
Samir
 
No, DCE doesn't (or atleast it didn't back then) come with the OS media. It was an add-on.

Have you tried using the non-DCE install for HPOV? Its been ages since I dealt with this, but I think there was two different install methods that could be used for OV, one required DCE (which we were never able to get because it was an additional cost that our department didn't want to pay for) and NCS (I think that's what it was called). We got the non-DCE version running just fine.

Maybe an option for you too.

Sorry I can't provide more info, been too long ago and I've slept since then. :)

Regards,
Chuck
 
Yeah it looks that way.

if you dont have the install disks for dce, then perhaps you can try what cspilman is suggesting.
 
Thanks cspilman and Breslau for your support.

I will check with my team so that they can go for NCS instead of DCE. But my team member is saying HP now a days not supporting NCS, as we were installing HPOV 7.2.

I will check with them again and will get back to you with update.

Thanks again

Sam
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top