Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DC replication during DR testing
- Thread starter nels
- Start date
I've never heard of any settings that will stop AD replication..
Because of this our approach is to disconnect the link from our DR site to our production network.
As we use pluggable disks we first remove one mirrored disk so no matter what changes we make to AD under DR conditions we can return to the original setup. At the end of the test we remove the disk we have been making changes on, reinsert the disk we removed at the beginning of the week and reboot the DC. We bring the link back up and it resynchronises with it's partners.
Not sure if that helps in your situation though....
Because of this our approach is to disconnect the link from our DR site to our production network.
As we use pluggable disks we first remove one mirrored disk so no matter what changes we make to AD under DR conditions we can return to the original setup. At the end of the test we remove the disk we have been making changes on, reinsert the disk we removed at the beginning of the week and reboot the DC. We bring the link back up and it resynchronises with it's partners.
Not sure if that helps in your situation though....
- Status
Similar threads
- Locked
- Question
- Locked
- Question