Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DBC 4422 IP OFFICE

Status
Not open for further replies.

DEIVIDOS

Technical User
Nov 14, 2006
75
ES
HI All;
I have Ip telephone type dbc422 and i am trying to configure to do a confernece with the key 3,only i can do the conference with the key of the telephone
how can solve this problem?
Regards
the config.txt is :

;[FunctionKeysDBC422]
;Conference=3
;Transfer=2
;Settings=5
;FollowMe=
;MessageWaiting=7
;FreeOnSecond=8
;CallList=9
;CallPickUp=
;CallWaiting=
;Intrusion=
;EnablePBXStoring=NO

[SuffixServices]
Intrusion=8
CallWaiting=4
CallBack=5
CallPickUp=6
Conference=3
 
try removing the ; from infront of the Conference=3 in the function key section. you will need to reboot the phone to take on the config change(c*mute). and try it again..

"There is no place like 127.0.0.1
 
DrewMk2, you also uncomment the header. when the header is not enabled, the phone will receive a standard layout.

[FunctionKeysDBC422]
Conference=3
Transfer=2
Settings=5
FollowMe=
MessageWaiting=
FreeOnSecond=
CallList=9
CallPickUp=
CallWaiting=
Intrusion=
EnablePBXStoring=NO

this should work. if you uncomment the header , you MUST define the transfer andd settings key.

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
hi whosrdaddy !!
I try to change this in the config.txt but don´t work, only work if i programm conference in one key of this telephone.
any ideas??
thanks a lot
 
sorry my bad yes you are correct whosrdaddy...

DEIVIDOS
what do you mean by "only work if i programm conference in one key of this telephone".

The config.txt file sets the function keys.
the only programming options of keys from the PBX is TNS or MNS...

can I confirm that you are initiating the conf as follows:

A call to the first party is established on Line 1 key.
Press the Conference key, the Inquiry key or the Line 2 key.
Dial the second party"s extension number (inform about the conference).
Press the Conference key.
During the conference, conference tone will be heard.





"There is no place like 127.0.0.1
 
I think he means the suffix 3 to initiate conference.
DEIVIDOS :

look at this section:

[SuffixServices] ;DBC422 only
Intrusion=8
CallWaiting=5
CallBack=6
CallPickUp=4
Conference=3

here you can put the correct value for conference suffix

/Daddy


-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top