db25 modular serial adapter pinout over cat 5 cable on POS-X ION TP2 terminal

[skillz890]

so i have a terminal and a serial printer which i want to both connect. on the printer end i am using a db25 to rj45 modular adapter i would like some help with the color and pinout so that it connects on an cat5 straight cable leading back to the terminal. On the terminal however i am not using Any adapter there is a rj45 serial port built in so the cat 5 cable should go directly in there.
The terminal im using however is POS-X ION TP2

If anyone can help me with the pinot of the db25 to rj45 on the printer end i would appreciate it much.

 

[jrgood0852]

If you can't find it here, you can't find it anywhere. Look for the config you request........

http://pinouts.ru/

 

[jrgood0852]

I think this is it:

http://pinouts.ru/SerialPortsCables/rj45todb25_cisco_pinout.shtml

 

[skillz890]

That pinout is for adapters on both ends. What I need is pinout for serial printer which uses a rj45 to db25 adapter. I then want to connect an ethernet cable from that adapter going back to a terminal but the terminal has a built in rj45 serial port so I would want the pinout of the actual ethernet cable as it it going directly to a rj45 serial port and now an adapter. Thanks for your help though

 

[jrgood0852]

No problem, skillz. Peruse that site anyway....you may find what you are looking for. Thanks.