DB Table Error in log MCD4.2 1

[sarond]

Hi all,

I have recently upgraded a 3300 CXi from MCD4.1 SP2 to MCD4.2.
I am now getting warnings in the logs every 10mins.

Log Type Software
Log Number 373
Severity Warning
Date 2010/Dec/08
Time 09:29:29
Source Call Control - Software
Description DB (DBTable) error: Table 198 not supported in Table_Record_Exists.
Module Main
File Name and Line Number log_outputs_util_en.c;1622

I have tried a backup and restore but still no luck. Can anyone point me in the right direction.

 

[nytalkin]

Do you get an error when running a DBMS CHECK?

NO GOOD DEED GOES UNPUNISHED!

 

[sarond]

I've run a DBMS Check Full and get 0 errors.

 

[Supernova99]

You have an error in your XNET and/or IP Networking forms

Either there is an entry that is not complete or is not referenced or most likely does not have a valid IP address

Share what you know - Learn what you don't

 

[sarond]

Thanks Supernova99,

There was a rogue entry in the ICP/PBX Networking form.

Much appreciated, no more warnings are being generated in the logs now.

 

[RossBC]

Supernova would you be able to share the information that you used to come to that conclusion?
thanks

 

[Supernova99]

I have had a customer that had a Table 198 error in the past and Table 198 refers to the XNET IP Networking form.

If you have this type of error and are unable to fix it yourself via forums like these you can of course call Mitel Technical support who will be able to tell you what table the error is referring to.

Share what you know - Learn what you don't

 

[sarond]

Mitel Tech Support was my next port of call.

It was not disrupting any service so I thought I would try the forums first, that way everybody learns