DayEnd Processing could not process all transactions - PO0335: ????????

[ant0n10]

We encountered DayEnd processing problems and it gives an error message that it can't process all the transcations. RVSPY shows below error. Please help in tracking down what's causing the problem. Thank you in advance.

[6f8] 0 <==[02:57:48.74;t=0;ovh=0] {view=0x0486700c}
[6f8] IC0276: ICDEP [02:57:48.74].Cancel(view=0x0486700c)
[6f8] 0 <==[02:57:48.74;t=0;ovh=0] {}
[6f8] IC0276: ICDEP [02:57:48.74].Close(view=0x0486700c)
[6f8] GP0950: GPGLPO [02:57:48.74].Close(view=0x030d200c)
[6f8] 0 <==[02:57:48.74;t=0;ovh=0] {}
[6f8] GP0950: GPGLPO [02:57:48.74].Unload
[6f8] 0 <==[02:57:48.74;t=0;ovh=0] {}
[6f8] IC0276: ICDEP [02:57:48.74].Unload
[6f8] OE0260: OEDEND [02:57:48.75].Open(PIB=2047, link=134)
[6f8] 0 <==[02:57:48.75;t=0;ovh=0] {view=0x0312f00c}
[6f8] OE0260: OEDEND [02:57:48.75].Cancel(view=0x0312f00c)
[6f8] 0 <==[02:57:48.75;t=0;ovh=0] {}
[6f8] OE0260: OEDEND [02:57:48.75].Close(view=0x0312f00c)
[6f8] 0 <==[02:57:48.75;t=0;ovh=0] {}
[6f8] OE0260: OEDEND [02:57:48.75].Unload
[6f8] PO0335: ???????? [02:57:48.75].Unload
[6f8] 9903 <==[02:57:48.75;t=3906;ovh=1413] {**ERROR**}

 

[Jay Converse]

Look farther back in the log, that's where the real error is.

Sage 300 Whisperer

 

[ant0n10]

Hi Jay,

looked farther the log and found out below multiply error. Does this mean the data is screwed-up?

1.)[6f8] CS0030: CSSKTB [02:57:43.91].Fetch(view=0x01d2d50c)
[6f8] 1 <==[02:57:43.91;t=0;ovh=0] {**ERROR**}

2.) [6f8] AS0007: CSUSCST [02:57:44.01].Fetch(view=0x01d3fdfc)
[6f8] 1 <==[02:57:44.01;t=0;ovh=0] {**ERROR**}

3.) [6f8] GL0022: GLABK [02:57:45.00].Fetch(view=0x01d7c95c)
[6f8] 1 <==[02:57:45.00;t=0;ovh=0] {**ERROR**}

4.) [6f8] GL0008: GLBCTL [02:57:45.07].Fetch(view=0x01d5a00c)
[6f8] 1 <==[02:57:46.40;t=1331;ovh=0] {**ERROR**}

5.) [6f8] IC0378: ICOFH [02:57:46.66].Read(view=0x01d7ec54)
[6f8] 1 <==[02:57:46.66;t=0;ovh=0] {**ERROR**}

6.) [6f8] IC0420: ICPOSTR [02:57:46.67].Fetch(view=0x01ddc304)
[6f8] IC0560: ICRCPH [02:57:46.67].Fetch(view=0x01daa744)
[6f8] 1 <==[02:57:46.67;t=0;ovh=0] {**ERROR**}
[6f8] 1 <==[02:57:46.67;t=0;ovh=0] {**ERROR**}

7.) [6f8] PO0585: POOFH [02:57:46.80].Read(view=0x01d7ec54)
[6f8] 1 <==[02:57:46.80;t=0;ovh=0] {**ERROR**}

8.) [6f8] PO0580: POOFD [02:57:46.81].Fetch(view=0x030f4f4c)
[6f8] 1 <==[02:57:46.81;t=0;ovh=0] {**ERROR**}

9.) [6f8] AP0500: APOFD [02:57:46.82].Fetch(view=0x030ff5e4)
[6f8] 1 <==[02:57:46.82;t=0;ovh=0] {**ERROR**}

10.) [6f8] PO0351: POGLREF [02:57:46.88].Fetch(view=0x01ddbbfc)
[6f8] 1 <==[02:57:46.88;t=0;ovh=0] {**ERROR**}

11.) [6f8] GL0022: GLABK [02:57:46.99].Fetch(view=0x01d7c95c)
[6f8] 1 <==[02:57:47.00;t=10;ovh=0] {**ERROR**}

12.) [6f8] GL0022: GLABK [02:57:46.99].Fetch(view=0x01d7c95c)
[6f8] 1 <==[02:57:47.00;t=10;ovh=0] {**ERROR**}

13.) [6f8] PO0330: POCRNZ [02:57:48.38].Fetch(view=0x030e88ec)
[6f8] PO0312: POCRNI [02:57:48.38].Fetch(view=0x0329d044)
[6f8] 1 <==[02:57:48.38;t=0;ovh=0] {**ERROR**}
[6f8] 1 <==[02:57:48.38;t=0;ovh=0] {**ERROR**}
[6f8] PO0445: POINVZ [02:57:48.38].Fetch(view=0x03107494)

14.) [6f8] PO0732: PORETI [02:57:48.38].Fetch(view=0x04b18c0c)
[6f8] 1 <==[02:57:48.38;t=0;ovh=0] {**ERROR**}

15.) [6f8] AP0015: APVEN [02:57:48.48].Read(view=0x04bee8fc)
[6f8] 1 <==[02:57:48.48;t=0;ovh=0] {**ERROR**}

16.) [6f8] 0 <==[02:57:48.53;t=0;ovh=0] {}
[6f8] 0 <==[02:57:48.53;t=51;ovh=51] {}
[6f8] PO0700: PORCPH [02:57:48.53].Read(view=0x0489611c)
[6f8] 1 <==[02:57:48.53;t=0;ovh=0] {**ERROR**}
[6f8] 1 <==[02:57:48.53;t=71;ovh=71] {**ERROR**}
[6f8] 1 <==[02:57:48.53;t=1853;ovh=1103] {**ERROR**}
[6f8] IC0276: ICDEP [02:57:48.53].Cancel(view=0x01d3cdcc)

17.) [6f8] GL0008: GLBCTL [02:57:48.53].Get(view=0x01d5a00c, field=1, size=6)
[6f8] 0 <==[02:57:48.53;t=0;ovh=0] {buffer='\30\30\39\36\37\38' -> '009678'}
[6f8] 1 <==[02:57:48.53;t=0;ovh=0] {**ERROR**}
[6f8] GL0008: GLBCTL [02:57:48.53].Put(view=0x01d5a00c, field=8, size=1, verify=0, buffer='\33')

 

[Jay Converse]

No, keep looking.

Sage 300 Whisperer